How to set up the POS machine C7

Created by Weebo Support, Modified on Fri, 17 Jun 2022 at 02:32 AM by Weebo Support

Follow the steps to set up the POS machine

  1. Take out the POS machine from the box, there should be a main POS machine, power cable, cash box and RJ11 cable.
  2. Connect the POS machine to power using the power cable.
    Open the cover behind the POS and plug into the power port (1st port from the right)
  3. Connect the POS to the cashbox using the RJ11 cable.
    Open the cover behind the POS and plug into the 2nd port from the right on the POS side. Ensure plug in to the correct port for the RJ11 cable to prevent damage of the cable head.
  4. Now power on the POS by pressing the POWER button on the right at front.
  5. Swipe to unlock and locate the POSPAL app.
  6. Key in the user and password to login the POSPAL.
  7. Place in a paper roll for the receipt printer.
  8. The paper roll would be located on the front side. For this machine pull up the cover to open the paper roll cover
  9. Place the paper roll inside in counter clockwise direction when looking from the left.
  10. Close the cover.
  11. Enter the setting page.
  12. In the case where, 2 receipt are required, change the amount of receipt to 2.
  13. In the case where kitchen slip is required, enable the kitchen receipt.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article